Liquid Chromatography Instruments
Waters Corp Plunger Seal Insertion Tool (100 µL)
The Plunger Seal Insertion Tool is used to pry the old plunger seal out of the pump head, as well as aligning the new plunger seal correctly into the pump head.
Waters Corp Waters Tubing, Teflon, 50 ft, Preparative Funnel Adapter
Waters Tubing, Teflon, 50 ft, Preparative Funnel Adapter
Waters Corp Waters Cable Assembly, Event In/Out, HPLC
The Event In/Out Cable Assembly is designed to connect external devices, such as manual injectors, to the 10-pin terminal strip located on the rear panel of the instrument.
- Functions as an input/output cable
- Designed for HPLC systems
- Replaced as needed to maintain system performance
Waters Corp CORTECS HILIC Method Validation Kit, 2.7 μm, 90Å
CORTECS HILIC Columns are high-efficiency columns based on a solid-core particle that are designed to retain extremely polar analytes. They offer orthogonal selectivity versus C18 columns.
- Particle size: 2.7 μm
- Pore size: 90 Å
- Inner diameter: 4.6 mm
- Length: 30 mm
- Units per package: 3 pk
- Chemistry: HILIC
- Separation mode: Hydrophilic Interaction (HILIC)
- Particle substrate: Silica
- pH range: 1 pH to 5 pH
- Maximum pressure: 18000 psi (1240 Bar)
- Particle technology: Solid core
- Method validation kit format
Waters Corp Method Validation Kit, PFP/Fluoro-Phenyl, 100 Å, 5 μm, 4.6 mm X 150 mm
This product is a Method Validation Kit designed for chromatography applications. It features HSS particle technology and a PFP/Fluoro-Phenyl stationary phase, ensuring reliable performance in analytical procedures.
- PFP/Fluoro-Phenyl stationary phase
- 5 μm particle size
- 100 Å pore size
- 4.6 mm inner diameter
- 150 mm length
- Units per package: 3 pk
- HSS particle technology
Waters Corp Diverter Valve, Replacement Part, 2767 Sample Manager
This Diverter Valve is a replacement part designed for the 2767 Sample Manager, used within HPLC systems.
- Replacement part for the 2767 Sample Manager
- Suitable for HPLC systems
- Supplied as a spare part kit
- Units per package: 1
Alkali Scientific SealSafe MiniStrips™ Sealing Film, Sterile, 200/pk
SealSafe MiniStrips™ sealing films are designed for sealing only one or two 8-well rows at a time on either strip-well or standard plates whenever rows must be selectively protected or accessed. Each MiniStrips film is 19.0 x 102.9mm, including 2 positioning tabs. The long dimension with the tabs removed is 82.6mm. MiniStrips are supplied in sheets of four from which strips can be peeled individually or two-at a time for application to plates. Sterile product is packaged in 100 um tamper-evident bags of 50 sheets of 4 sealing film strips.
Waters Corp RADIAN ASAP Direct Mass Detector, Single Quadrupole, Integrated ASAP Source
The RADIAN ASAP Direct Mass Detector is a dedicated direct analysis system for rapid, easy, and low-cost liquid and solid analysis. It uses single quadrupole mass spectrometry with an Atmospheric Pressure Solids Analysis Probe (ASAP) for quality and ease of use in a compact footprint. This enables direct MS analysis without complex sample preparation or MS experience.
- Simple operation and data interpretation
- Minimal sample preparation; no separation required
- Real-time results and classification
- Easy to learn, fully automated setup
- Direct sampling onto glass probe; minimizes solvent use
- Rapid 30-second analysis time
- Compact design
- Dedicated single quadrupole mass detector with integrated ASAP source
- Pre-optimized ASAP source for structural identification
- Automated mass calibration and resolution verification
- Programmable temperature control
Waters Corp CORTECS C8 Method Validation Kit, 90Å, 2.7 μm
This CORTECS C8 Method Validation Kit is designed for general purpose method development under low pH test conditions. The C8 ligand is preferred for some assays because it is less hydrophobic and therefore less retentive compared to C18 phases, making it suitable for method validation purposes.
- Particle size: 2.7 μm
- Pore size: 90 Å
- Dimensions: 3 mm x 75 mm
- Quantity per package: 3 pk
- Chemistry: C8
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8
- Temperature limits: 45 °C
- Maximum pressure: 18000 psi (1240 Bar)
- Particle technology: Solid core
- Format: Column
- System: UPLC, UHPLC
- Surface area: 100
- Endfitting type: Parker-style
- Particle shape: Spherical
- Silanol activity: Low
- Endcapped: Yes
Waters Corp Tubing Kit, GPV, For Alliance Separations Modules
The Waters Corporation GPV Tubing Kit is designed for use with Alliance 2690/2695 and 2790/2795 Separations Modules. It provides replacement tubing for the gradient proportioning valve (GPV) outlet.
- Used to replace GPV outlet tubing in Alliance separations modules.
- Enables customization for low- or high-flow applications.
- Suitable for replacing clogged standard tubing.
- Helps provide appropriate volume for mixing needs.
Waters Corp Seal, Wash, .0787 ID, Fixed, Bio, 2-pack
This is a Seal, Wash spare part, featuring a .0787 ID, fixed design, and bio-compatibility. It is supplied as a 2-pack for convenient replacement.
- This spare part is a quality part.
- Product type: Spare parts kits
- Replacement schedule: As required
- Units per package: 2
Waters Corp Tubing Assembly, Vent Valve Port 5 to Filter
Tubing Assembly, Vent Valve Port 5 to Filter